SCD H Series
Aquafine’s SCD H™ series provides TOC and chlorine destruction solutions, maximizing reduction efficiency in high volume, ultrapure, waste or reclaim applications for both indoor and outdoor installation flexibility.
Aquafine SCD H™ systems for TOC (total organic carbon) and chlorine destruction can be found worldwide in state-of-the-art microelectronic facilities and life science applications where meeting stringent criteria of the cGMP and full acceptance by the FDA are mandatory.
The SCD H™ series consists of 316L stainless steel treatment chamber and a UL TYPE-1 painted carbon steel control cabinet, with a maximum cable length of 15ft. (5m). The control cabinet features a microprocessor-based controller. The units compact size reduces footpint and maximizes installation flexibility. Single-ended (SE) HX lamps allow quick change-outs without tools.
Utilizing our modular skid configurations, less floor space and higher flow rates with state-of-the-art technology, Aquafine’s ultraviolet (UV) systems are an innovative, reliable and environmentally responsible alternative.
Aquafine TOC and chlorine destruction systems can be found worldwide in state-of-the-art microelectronic facilities and life science applications where meeting stringent criteria of the cGMP and full acceptance by the FDA are mandatory.
UV Technology
Aside from being environmental responsible, UV light technology for water treatment has several advantages. Used effectively as a system for the reduction chlorine and TOC, Aquafine utilizes UV light in a 185nm wavelength. This energy, more powerful than 254nm used in disinfection applications, promotes the formation of free radicals, leading to the oxidation of organics into CO2 and H2O.
Safe & Effective
UV does not ‘add’ anything to the water stream such as undesirable color, odor, chemicals, taste or flavor, nor does it generate harmful by-products. UV only imparts energy to the water stream in the form of ultraviolet light to inactivate microorganisms or reduce chemical compounds present in the water.
| Model: SCD H™ |
600 H
|
700 H
|
1000 H
|
1200 H
|
1350 H
|
1450 H
|
1750 H
|
| MAXIMUM FLOW RATE |
| (@95% UVT) GPM (M3/HR)* |
60 (14)
|
65 (15)
|
95 (22)
|
115 (26)
|
130 (30)
|
140 (32)
|
170 (39)
|
| (@99% UVT) GPM (M3/HR)* |
70 (16)
|
80 (18)
|
115 (26)
|
135 (31)
|
150 (34)
|
165 (38)
|
200 (45)
|
| NUMBER OF UV LAMPS (HX SINGLE-ENDED) |
16
|
20
|
24
|
36
|
40
|
44
|
44
|
ELECTRICAL REQUIREMENTS
|
| ELECTRICAL SUPPLY |
120-240V/50-60Hz, Single PHaSe, 2 W + gnD
|
208-240V/50-60Hz, Single PHaSe, 2 W + gnD
|
| OPERATING POWER (NOMINAL WATTS) |
2700
|
3250
|
3800
|
5700
|
6250
|
6800
|
6800
|
| BALLAST TYPE |
eleCTROniC
|
CONTROLLER/DETECTOR
|
| UV VISION 2000 |
UV g400 SeRieS
|
| LAMP STATUS INDICATOR |
STanDaRD
|
| LAMP OUT ALERT (LOA) |
STanDaRD
|
| RUNNING TIME METER/CyCLE COUNTER |
STanDaRD
|
| HAND OFF AUTO (HOA) 24VDC |
STanDaRD - OTHeR VOlTageS aVailaBle
|
| UV & TEMPERATURE DETECTOR |
OPTiOnal, analOg OUTPUT MODUle aVailaBle
|
| CONTROL CABINET
|
| CONTROL CABINET SySTEM RATING |
C.S - Ul TyPe 1, S.S. - Ul TyPe 3R** UL Pending
|
| MATERIALS OF CONSTRUCTION |
PainTeD CaRBOn STeel (STainleSS STeel OPTiOnal)
|
| REMOTE CABINET |
OPTiOnal
|
| ENCLOSURE HIGH TEMP WARNING |
STanDaRD
|
| CABINET DIMENSIONS INCHES C.S. (S.S.) |
22 x 30 x 16 (22 x 39 x 16)
|
30 x 30 x 16 (30 x 39 x 16)
|
| MM
C.S. (S.S.) |
559 x 762 x 406 (559 x 990 x 406)
|
787 x 787 x 406 (762 x 990 x 406)
|
| TREATMENT CHAMBER
|
| MATERIALS OF CONSTRUCTION |
316l STainleSS STeel
|
| INTERNAL SURFACE FINISH |
OPERATING TEMPERATURE °F (°C)Water: 50° - 10
|
| OPERATING TEMPERATURE °F (°C) |
Water: 50° - 104° (10° - 40°) ambient air: 35° - 100° (2° - 38°)
|
| MAX. OPERATING PRESSURE PSI (BAR) |
150 (10)
|
| INLET/OUTLET FLANGE SIzE INCHES STANDARD/OPTIONAL
(MM) |
3 / 2, or 4
(80 / 50 or 100)
|
4 / 2 or 3
(100 / 50 or 80)
|
4 / 3 or 6
(100 / 80 or 150)
|
* Dose Level: >600 mJ/cm2 after 9,000 hours of
operation.
** Available for stand alone units only. Skid systems available
in UL TYPE-12 Painted Carbon Steel Enclosure only. |
All specifications are subject to change without notice.
For
additional requirements, please contact Aquafine Corporation.
|
